SPL

Preamp / Monitor Controller

• Switchable level adjustment: Consumer to pro level 1: 1, +6 dB, +12 dB
• Line signal pre-amplification and headphone signal amplification for three sources
• Loudspeaker playback simulation on headphones

Preamp / Monitor Controller

• Switchable level adjustment: Consumer to pro level 1: 1, +6 dB, +12 dB
• Line signal pre-amplification and headphone signal amplification for three sources
• Loudspeaker playback simulation on headphones

USB Audio Interface and Monitor Controller

• 24 Bit/ 192kHz AD/DA converter
• 2 Mic XLR inputs
• 2 Hi-Z 6.3 mm jack instrument inputs

120 volt headphone amplifier

• With VOLTAiR technology
• Suitable for all headphones with impedances from 10 ohms
• XLR Input: Neutrik XLR, balanced, Pin 2 = (+)

Preamplifier / Monitor controller

• Suitable for all headphones with impedances from 10 ohms
• Balanced and unbalanced analogue inputs and outputs (XLR, RCA)
• Laterality: Extreme fine balance control

Preamplifier / Monitor controller

• SPL Pro-Fi Phonitor x in black, and DA converter 1670 (USB, coaxial, optical)
• Suitable for all headphones with impedances from 10 ohms
• Balanced and unbalanced analog inputs and outputs (XLR, RCA)

Preamplifier

• For record players with Moving Magnetic (MM) and Moving Coil (MC) pickup systems
• RIAA equalization built according to Doug Self
• Max. Amplification: 51 dB (MM), 70 dB (MC)

B-Stock with Full Warranty

• Speaker & headphone monitoring controller
• Consistently constructed analogously
• Connection and selection of two stereo sources

Speaker & Headphone Monitoring Controller

• All-analogue design
• Connection and selection of two stereo sources
• Two stereo speaker sets and two headphones can be connected and controlled independently

USB Audio Interface and Monitor Controller

• 24 Bit/ 192kHz AD/DA converter
• 2 Mic XLR inputs
• 2 Hi-Z 6.3 mm jack instrument inputs

Headphone Amplifier

• Phonitor 2 built into a 19" expansion rack with passive 1x4 switch
• Preamplifier / Monitor controller
• Switchable level adjustment (consumer to professional level 1:1, +6 dB, +12 dB)

B-Stock with full warranty

• For record players with moving magnetic (MM) and moving coil (MC) pickup systems
• RIAA equalization (built according to Doug Self)
• Max. gain: 51 dB (MM), 70 dB (MC)

Preamp / Monitor Controller

• Suitable for all headphones with impedances from 10 ohms
• Balanced and unbalanced analogue inputs and outputs (XLR, RCA)
• Laterality: Extreme fine balance control

• SPL Pro-Fi Phonitor e in black, and DA converter 1670 (USB, coaxial, optical)
• 120 V headphone amplifier with VOLTAiR technology
• Suitable for all headphones with impedances from 10 ohms

• Use Standalone or with DAW
• Up to 24-Bit / 192 kHz Resolution
• 2 x Mic Preamps, 2 x Instrument Inputs
• 6 x 1/4" TRS Inputs, RCA & 3.5mm Inputs

• Use Standalone or with DAW
• Up to 24-Bit / 192 kHz Resolution
• 2 x Mic Preamps, 2 x Instrument Inputs
• 6 x 1/4" TRS Inputs, RCA & 3.5mm Inputs

• XLR & RCA Ins for Studio & Consumer Gear
• Balanced & Unbalanced Headphone Outputs
• Simulate Loudspeakers with Matrix Switch
• Crossfeed & Angle Settings

B-Stock with full warranty

• Suitable for all headphones with impedances from 10 ohms
• Balanced and unbalanced analogue inputs and outputs (XLR, RCA)
• Laterality: Extreme fine balance control

• High-Speed USB Interface
• 64-Channel I/O via MADI
• Stereo TOSLINK Optical Output
• Up to 24-Bit / 192 kHz Resolution