Kulaklık Yükselteçleri

Preamplifier / Monitor controller

• Suitable for all headphones with impedances from 10 ohms
• Balanced and unbalanced analogue inputs and outputs (XLR, RCA)
• Laterality: Extreme fine balance control

Preamplifier

• For record players with Moving Magnetic (MM) and Moving Coil (MC) pickup systems
• RIAA equalization built according to Doug Self
• Max. Amplification: 51 dB (MM), 70 dB (MC)

• Intended for use with the X7
• Balanced Headphone Amplifier
• 1 x 3.5mm Headphone Output
• 1 x 2.5mm TRRS Balanced Headphone Out
• 5 Hz to 83 kHz Frequency Response

• 1RU Rack Chassis
• 4 Independent Stereo Channels
• 1/4" Inputs and Outputs
• Individual Volume Controls

• Dual AK4493EQ DAC Chips
• XMOS XUF208 USB Decoding Chip
• Audio up to 768 kHz/32-Bit
• Native DSD Decoding

• 1/4" and 3.5mm Headphone Jacks
• Volume Control
• 1/4" and 3.5mm Input/Thru Jacks

• Intended for use with the X7
• Update on the AM1 Featuring More Power

120 volt headphone amplifier

• With VOLTAiR technology
• Suitable for all headphones with impedances from 10 ohms
• XLR Input: Neutrik XLR, balanced, Pin 2 = (+)

• Solid-State Amplification Section
• Tube Amplification Section
• Single-Ended and Balanced Modes
• Unbalanced and Balanced Headphones

• 10-Channels with Level Control
• 1/4" Phone Rear Outputs
• 1/8" (3.5mm) Mini Front Outputs
• Balanced XLR Inputs

Personal Monitor Power Center

• PS-16 provides signals for up to 4 of the models PM-50, PM-50 OB or PM-351
• Inputs: XLR + 6.3 mm jack, transformer-balanced XLR inputs
• 4x Stereo 6.3 mm jack outputs

Headphone amplifier and D/A converter with USB interface

• USB 2.0, with up to 24 bit / 192 kHz PCM audio
• DSD with 2.8 / 5.6 MHz (DoP or ASIO)
• Frequency range: 20 to 80,000 Hz +/- 3 dB (1 kHz, 32 ohm loaded, 100 mW, FS 192 kHz)

Headphone Amplifier and D / A Converter

• With USB interface
• Processes audio data on the input side with 24 Bit / 96 kHz
• Internal PLL power supply for stable voltage supply

Headphone Amplifier System

• For stage and studio applications
• 8 Independent stereo amplifiers in 1U
• 2 Stereo main inputs for two independent mixes from all 8 output channels

B-Stock with Full Warranty

• Highest possible transmission quality for low-, medium- and high-impedance headphones
• Electronically balanced inputs
• Unbalanced inputs with priority

Compact 4-Way Headphone Amplifier

• Share a single stereo source with up to 4 headphone pairs
• 1 x 6.3 mm jack stereo input and 4x 6.3 mm jack stereo outputs with individual volume controls
• Dimensions: 51 x 109 x 58 mm

B-Stock with Full Warranty

• Speaker & headphone monitoring controller
• Consistently constructed analogously
• Connection and selection of two stereo sources

• ESS Sabre 32-Bit Hyperstream DAC
• 4x Quad Sum DAC Converters per Channel
• Constant Current Drive
• Time Domain Jitter eliminator

Stereo headphone amp

• Compact stereo headphone amplifier that drives 2 headphones
• Optimised for lowest noise and distortion
• Electronically balanced inputs

Speaker & Headphone Monitoring Controller

• All-analogue design
• Connection and selection of two stereo sources
• Two stereo speaker sets and two headphones can be connected and controlled independently

Headphone Amplifier

• Professional headphone amplifier system for stage and studio applications
• 6 Independent stereo high power amplifiers in 1U
• 6 Direct aux inputs

5 Channel Headphone Amplifier

• For professional monitoring in studios
• Studio and Live
• 3 Jack inputs (insert)

B-Stock with Full Warranty

• With 3 headphone outputs
• Suitable for in-ear listeners up to 20 ohms
• XLR left / right entrance

Headphone amplifier

• Combination of 24 x 16 x 8 monitor mixer, 6 channel headphone amplifier and USB/AVB audio interface
• 24 Inputs
• 8 Stereo bus outputs